OCEANS OF

Dobot Magician 3D Printing Contest

来自  Apr, 11, 2017
9 投票 30 浏览量
9 投票
30 浏览量
越疆难点.doc
2017. 04. 11
bytes
ALARM definition for Dobot Magician. The controller will monitor the system status in all Dobot products. The external software can read or clear the related alarm status according to this file.
bytes
Dobot can import PLT file to write or
engrave. In this process, one can use CoreDRAW to make PLT file, forming into personalized patterns or texts. import PLT file to write or engrave. In this process, one can use CoreDRA.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero. Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum imperdiet. Duis sagittis ipsu
Dobot can import PLT file to write or engrave. In this process, one can use CoreDRAW to make PLT file, forming into personalized patterns or texts. import PLT file to write or engrave. In this process, one can use CoreDRA.
Steps:
  • 1.Use CoreIDRAW to make.CDR file
  • 2.Transfer CDR file into .PLT
  • 3.Import .PTL Apllication to write or engrave
1.Open CorelDRAW and click on the “New” button to create a .CDR document, as shown in Figure 1. 2.In the popup dialog, rename a document, choose paper size, press default setting of other parameters, and click OK.
Figure 1 New Document
Figure 2 New Document
Steps:
  • 1.Use CoreIDRAW to make.CDR file
  • 2.Transfer CDR file into .PLT
  • 3.Import .PTL Apllication to write or engrave
1.Go to .generated CDR document in 7.1, select Save As .PLT filr, as shown in figure 72.In the popup dialog, select plotter origin as upleft, unit as 1016, and click ok, as shown in figure 9.3.Open CorelDRAW and click on the “New” button to create a .CDR document, as shown in Figure 1.4.In the popup dialog, rename a document, choose paper size, press default setting of other parameters, and click OK.
  • Figure 1 New Document

  • Figure 1 New Document

  • Figure 1 New Document

Steps:
  • 1.Use CoreIDRAW to make.CDR file
  • 2.Transfer CDR file into .PLT
  • 3.Import .PTL Apllication to write or engrave
To draw a straight segment, click where you want to start the line segment, and click where you want to end it.To draw a curved segment, click where you want to place the first node, and drag the control handle to where you want to place thenext node. Release the mouse button, and drag the control handle to create the curve you want.Double click to finish the line.Please write well texts first, and then copy them, fine tuning by shape tool.
""""""
评论: 0 30 0
评论0